Tara process clean up

Follow below steps to check for leftover arcmain processes when we abort a job (best to do this when all jobs have finished running so you don't kill a job that you want to run) And the procedure to restart services properly.

Example below is for Tidwprod 2 node linux bar system Primary: RRI1TDBPL1P and Secondry: RRI1TDBPL2P

Proper steps for restarting services:

a.   Stop the TARA Server services. Once the TARA Server services have stopped, the TARA Client services should stop automatically.

TARA Server

Stop:   /etc/init.d/tdtaraserver stop

Stop:    /etc/init.d/tdtaraclient stop

b.   Verify the TARA Client services have stopped. If not, stop the TARA Client services for each configured machine.

TARA Client

Stop:    /etc/init.d/tdtaraclient stop

c.   Run the netstat command and make sure no connections are still set for the port 54323 (default). If there are still listings with status: ESTABLISHED, CLOSE_WAIT, TIMED_WAIT, etc. wait 5 to 10 minutes to make sure these entries go away.

RRI1TDBPL2P:~ # netstat -pant | grep 54323

d.   Once the tcp connections have been cleared for TARA, start the TARA Server services. The TARA Client services may start automatically (within 5 minutes). Otherwise, start the TARA Client services.

TARA Server

Start:   /etc/init.d/tdtaraserver start

Start:   /etc/init.d/tdtaraclient start

TARA Client

Start:   /etc/init.d/tdtaraclient start

e.   Verify the connections are established between the TARA Server and the TARA Clients by running the netstat command.

TARA SERVER

RRI1TDBPL1P:~ # netstat -pant | grep 54323

tcp 0 0 0.0.0.0:54323 0.0.0.0:* LISTEN 29146/taraserver

tcp 0 0 10.18.33.43:54323 10.18.33.43:40926 ESTABLISHED 29146/taraserver

tcp 0 0 10.18.33.43:54323 10.18.33.45:38522 ESTABLISHED 29146/taraserver

tcp 0 0 10.18.33.43:40926 10.18.33.43:54323 ESTABLISHED 29252/TaraD

tcp 0 0 10.18.33.43:54323 10.18.32.101:4874 ESTABLISHED 29146/taraserver

tcp 0 0 10.18.33.43:54323 10.18.32.101:4960 ESTABLISHED 29146/taraserver

RRI1TDBPL1P: